Investigating the Effects of Functionalized Single Wall Carbon Nanotubes on the Cure Behavior of a Carbon/Epoxy Prepreg System by an Optimized Parameter Approach, Murat Öz, Yusuf Can Uz, Gamze Tanoglu, Metin Tanoglu, Murat Barisik, Polymer Composites, 1-16 (2025)
Fatigue-resistant design of carbon/epoxy composites based on a failure tensor polynomial model by particle swarm optimization-sequential quadratic programming algorithm, Deveci Hamza Arda, Artem Hatice Seçil, Güneş Mehmet Deniz, Tanoğlu Metin, Journal of Reinforced Plastics and Composites, Vol. 44(21-22) 2436–2449 (2025)
Improving mechanical behavior of adhesively bonded composite joints by incorporating reduced graphene oxide added polyamide 6,6 electrospun nanofibers, Yeke, M., Barisik, M., Tanoğlu, M., ... Dehneliler, S., Erdem İriş, M.Composite Structures 337, 118026 (2024)
Influence of intra-ply discontinuities on the mechanical behavior of continuous E-glass fiber reinforced composites, Kiliçoğlu, A.S., Tanoğlu, M., Bilmez, S.A., Güneş, M.D., Erdoğan, H.S., Journal of Composite Materials 58(28), pp. 2955–2973 (2024)
Multi-scale analysis of the adhesive bonding behavior of laser surface-treated carbon fiber reinforced polymer composite structures, Nuhoglu, K., Aktas, E., Tanoglu, M., ... Dehneliler, S., Iris, M.E.International Journal of Adhesion and Adhesives 130, 103643 (2024)
Fatigue-resistant design of carbon/epoxy composites based on a failure tensor polynomial model by particle swarm optimization-sequential quadratic programming algorithm Deveci, H.A., Artem, H.S., Güneş, M.D., Tanoğlu, M.Journal of Reinforced Plastics and Composites 05-29 (2024)
Investigating the Effects of PA66 Electrospun Nanofibers Layered within an Adhesive Composite Joint Fabricated under Autoclave Curing Esenoğlu, G., Tanoğlu, M., Barisik, M., ... Gürbüz, A.A., İriş, M.E.ACS Omega 8(36), pp. 32656–32666 (2023)
Analysis of adhesively bonded joints of laser surface treated composite primary components of aircraft structures, Nuhoğlu, K., Aktaş, E., Tanoğlu, M., ... Dehneliler, S., İriş, M.E.International Journal of Adhesion and Adhesives 126, 103456 (2023)
Effects of nanosecond laser ablation parameters on surface modification of carbon fiber reinforced polymer composites, Hande Iplikçi, Murat Barisik, Ceren Türkdogan, Seçkin Martin, Melisa Yeke, Kaan Nuhoglu, Gözde Esenoglu, Metin Tanoglu, Engin Aktas, Serkan Dehneliler, Mehmet Erdem Iris Journal of Composite Materials, 57, 18, 2843-2855 (2023)
Improving adhesive behavior of fiber reinforced composites by incorporating electrospun Polyamide-6, 6 nanofibers in joining region, Gözde Esenoglu, Murat Barisik, Metin Tanoglu, Melisa Yeke, Ceren Türkdogan, Hande Iplikçi, Seçkin Martin, Kaan Nuhoglu, Engin Aktas, Serkan Dehneliler, Mehmet Erdem Iris Journal of Composite Materials, 56.29, 4449-4459 (2022)
Determination of activation energy for carbon/epoxy prepregs containing carbon nanotubes by differential scanning calorimetry, Yusuf Can Uz, Metin Tanoglu High Performance Polymers, 35 (2), pp.166-180 (2022)
Investigation of hybridization effect on ballistic performance of multi-layered fiber reinforced composite structures, Hikmet Sinan Ustün, Ahmet Kaan Toksoy Metin Tanoglu, Journal of Composite Materials, vol. 56(15) 2411–2431 (2022)
Enhancement of filament wound glass fiber/ epoxy-based cylindrical composites by toughening with single-walled carbon Nanotubes, Zeynep Ay Solak, Osman Kartav, Metin Tanoglu, Polymers and Polymer Composites, vol. 30: 1–13 (2022)
Experimental and statistical analysis of carbon fiber/epoxy composites interleaved with nylon 6,6 nonwoven fabric interlayers, Bertan Beylergil, Metin Tanoğlu, Engin Aktaş, Journal of Composite Materials, (2020)
Investigation of interlayer hybridization effect on burst pressure performance of composite overwrapped pressure vessels with load-sharing metallic liner, Serkan Kangal, Osman Kartav, Metin Tanoglu, Secil Artem, Engin Aktas, Journal of Composite Materials, 54, 7, 961-980 (2019)
Mode-I fracture toughness of carbon fiber/epoxy composites interleaved by aramid nonwoven veils, 31, 2, 113-123 Bertan Beylergil, Metin Tanoğlu, Engin Aktaş, Steel and Composite Structures(2019)
Developing polymer composite-based leaf spring systems for automotive industry, N. Oztoprak, M. D. Gunes, M. Tanoglu, E. Aktas, O. O. Egilmez, C. Senocak, G. Kulac, Science and Engineering of Composite Materials, (2018)
Effect of polyamide-6,6 (PA 66) nonvowen veils on the mechanical performance of carbon fiber / epoxy composites, Bertan Beylergil, Metin Tanoğlu, Engin Aktaş, Composite Structures, 194, 21-35 (2018)
Enhancement of Interlaminar Fracture Toughness of Carbon Fiber/Epoxy Composites Using Polyamide 6/6 Electrospun Nanofibers, Bertan Beylergil, Metin Tanoğlu, Engin Aktaş, Journal of Applied Polymer Science, 134, 35 (2017)
Modification of carbon fiber/epoxy composites by polyvinyl alcohol (PVA) based electrospun nanofibers, Bertan Beylergil, Metin Tanoğlu, Engin Aktaş. Advanced Composites Letters, 25(3): 69-76 (2016)
Optimal design of compressed hydrogen storage vessels using multi-objective genetic algorithm. Bertan Beylergil, Engin Aktaş, Metin Tanoğlu, H.Seçil Artem. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications(2016)
Dynamic behavior predictions of fiber-metal laminate/aluminum foam sandwiches under various explosive weights, S.B. Bastürk, M. Tanoglu, Journal of Sandwich Structures and Materials, vol. 18 no. 3 321-342 (2016)
Effects of hybrid yarn preparation technique and fiber sizing on the mechanical properties of continuous glass fiber-reinforced polypropylene composites, E. Merter, G. Başer, M. Tanoglu, Journal of Composite Materials, vol. 50, issue 12, pp. 1697-1706 (2016)
Development and Mechanical Behavior of FML/Aluminium Foam Sandwiches, S.B. Bastürk, M. Tanoglu, Applied Composite Materials, Vol. 20, 5, 789-802, (2013)
Interfacial properties of aluminum/glass-fiber reinforced polypropylene sandwich composites, S.B. Bastürk, A. Guruscu, M. Tanoglu, Mechanics of Composite Materials, Vol. 49, 3, 317-324 (2013)
Development of electrically conductive and anisotropic gel-coat systems using CNTs, Atike Ince Yardımcı, Metin Tanoglu, Yusuf Selamet, Progress in Organic Coatings v. 76, 6, 963-965 (2013)
Mechanical behavior of polypropylene based honeycomb cored composıte sandwich structures, F. Sezgin, M. Tanoglu, O. Eğilmez, C. Dönmez, Journal of Reinforced Plastics and Composites, vol. 29 , 10 , 1569-1579 (2010)
Characterization investigations during mechanical alloying and sintering of W-20 vol% SiC composites, S. Coskun S, ML. Övecoğlu, B. Özkal , M. Tanoğlu, Journal of Alloys and Compounds Vol. 492, 1-2, 576-584 (2010)
Tensile mechanical behavior and fracture toughness of MWCNT and DWCNT modified vinyl-ester/polyester hybrid nanocomposites produced by 3-roll milling, A. Tuğrul Seyhan, Metin Tanoğlu, Karl Schulte, Materials Science and Engineering: A, Volume 523, Issues 1-2, 15 October 2009, Pages 85-92
Thermal curing behavior of MWCNT modified vinyl ester- polyester hybrid resin suspensions prepared with 3-roll milling technique, A.T. Seyhan, A. De La Vega, M. Tanoglu, K. Schulte, Journal of Polymer Science Part B: Polymer Physics, v.47, 1511-1522 (2009)
Cure kinetics of vapor grown carbon nanofiber (VGCNF) modified epoxy resin suspensions and fracture toughness of their resulting nanocomposites, A.T. Seyhan, Z. Sun, J. Deitzel, M. Tanoglu, D. Heider, Materials Chemistry and Physics, (2009)
Mode I and mode II fracture toughness of E-glass non-crimp fabric/carbon nanotube (CNT) modified polymer based composites, A.T. Seyhan, M. Tanoglu, K. Schulte, Engineering Fracture Mechanics Volume 75, Issue 18, Pages 5151-5162, (2008)
Layered Clay/Epoxy Nanocomposites: Thermomechanical, Flame Retardancy and Optical Properties, E. Kaya, M. Tanoğlu, S. Okur, Journal of Applied Polymer Science, vol. 109, 834-840 (2008)
Mechanical and thermal behavior of non-crimp glass fiber reinforced layered clay/epoxy nanocomposites, Bozkurt E, Kaya E, Tanoglu M, Composites Science and Technology Volume: 67 Issue: 15-16 Pages: 3394-3403, (2008)
Cure kinetics of epoxy resin-natural zeolite composites, B.C.Erdoğan, A.T. Seyhan, Y. Ocak, M. Tanoğlu, D. Balköse, S. Ülkü, Journal of Thermal Analysis and Calorimetry, Springer Netherlands, 18.12.2008, vol. 94, no. 3, pp. 743-747, (2008)
Thermostable tensoresistors of Co doped GaSb–FeGa1.3 eutectic composites R.N. Rahimova, A.A. Khalilova, D.H. Arasly, M.I. Aliyev, M. Tanoglu, L. Ozyuzer, Sensors and Actuators A: Physical Volume 147, Issue 2, 3 Pages 436-440 (2008)
Effects of Light Curing Method and Exposure Time on Mechanical Properties of Resin Based Dental Materials, A. R. Alpöz, F. Ertuğrul, D. Cogulu, A. Topaloğlu Ak, M. Tanoğlu, E. Kaya, European Journal of Dentistry vol. 2, (2008), 37-42.
Rheological and dynamic-mechanical behavior of carbon nanotube/vinyl ester–polyester suspensions and their nanocomposites, A.T. Seyhan, F.H. Gojny, M. Tanoğlu and K. Schulte, European Polymer Journal, Volume 43, Issue 7, (July 2007), 2836-2847.
Critical aspects related to processing of polyester/ nanocomposites, A. T. Seyhan, F.H.M. Wichmann, M. Tanoğlu, K. Schulte, European Polymer Journal, Volume 43, Issue 2, (February 2007), 374-379.
Porous nanocomposites prepared from layered clay and PMMA (poly methylmethacrylate), Tanoglu, M., Ergun, Y., Composites Part A: Applied Science and Manufacturing, Volume 38, Issue 2, (February 2007), 318-322.
Temperature Dependence of Electrical Conductivity in Double-Wall and Multi-Wall Carbon Nanotube / Polyester Nanocomposites, Y. Simsek, L. Ozyuzer, A.T. Seyhan, M. Tanoglu, K. Schulte, Journal of Materials Science, 42 (2007) 9689-9695.
Silicon oxycarbide based composites produced from pyrolysis of polysiloxanes with active Ti filler Akkas, H. D., Öveçoğlu, M.L., Tanoğlu, M. Journal of the European Ceramic Society Volume 26, Issue 15, 3441-3449 (2006).
MgB2 superconducting thin films sequentially fabricated using DC magnetron sputtering and thermoionic vacuum arc method, S. Okur, M. Kalkancı, S. Pat, N. Ekem, T. Akan, Z. Balbag, G. Musa, M. Tanoğlu, Phycica C, Superconductivity and It’s Applications, 466, Issues 1-2, p. 205-208 (2007).
Morphosynthesis of CaCO3 at different reaction temperatures and the effects of PDDA, CTAB, and EDTA on the particle morphology and polymorph stability, E. Altay, T. Shahwan and M. Tanoğlu, Powder Technology, 178 p.197-205 (2007).
Effect of aluminum closed-cell foam filling on the quasi-static axial crush performance of glass fiber reinforced polyester composite and aluminum/composite hybrid tubes, M. Guden, S. Yüksel, A. Taşdemirci and M. Tanoğlu, Composite Structures, Volume 81, Issue 4, (December 2007), 480-490.
Processing, characterization and photocatalytic properties of Cu doped TiO2 thin films on glass substrate by sol–gel technique, E. Celik, Z. Gokcen, N.F. Ak Azem, M. Tanoglu and O.F. Emrullahoglu, Materials Science and Engineering B Volume 132, Issue 3, 258-265 (2006).
Preparation and characterization of Fe2O3–TiO2 thin films on glass substrate for photocatalytic applications, Celik, E., Yıldız, A.Y., Ak Azem, N.F., Tanoglu, M., Toparlı, M., Emrullahoglu, O.F., Ozdemir, I. Materials Science and Engineering B Volume 129, Issues 1-3, 193-199 (2006).
Electrical and mechanical properties of superconducting MgB2/Mg metal matrix composites. Egilmez, M., Ozyuzer, L., Tanoğlu, M., Okur S., Kamer O., Oner, Y. Superconductor Science and Technology, 19, 359-364 (2006).
Artificial neural network (ANN) prediction of compressive strength of VARTM processed polymer composites, Seyhan, A.T, Tayfur, G., Karakurt, M., Tanoğlu, M., Computational Materials Science, 34, 99-105 (2005).
Polymethyl methacrylate based open-cell porous plastics for high-pressure ceramic casting, Ergün, Y., Dirier, C., Tanoğlu, M., Material Science and Engineering: A, 385, 279-285 (2004).
Strain gauges of GaSb-FeGa1.3 eutectic composites, Aliyev, M. I., Khalilova, A.A., Arasli, D. H., Rahimov, R. N., Tanoglu, M., Ozyuzer, L., Applied Physics A, Materials Science and Processing A00, 1-4 (2004).
Development of Sİ-O-C Based Ceramic Matrix Composites Produced via Pyrolysis of a Polysiloxane, Akkas, H. D., Öveçoğlu, M.L., Tanoğlu, M. Key Engineering Materials, v.264-268, p. 961-964, (2004).
Microstructure performance interrelation in PMMA-based open-cell porous materials for high pressure ceramic sanitaryware casting, Ergün, Y., Dirier, C., Yılmaz, M., Tokman, C., Tanoğlu, M. Key Engineering Materials, v.264-268, p. 2235-2238, (2004).
The electrical and microstructure properties of Superconducting Mg/MgB2 composites Eğilmez, M., Okur, S., Tanoğlu, M., Özyüzer, L Key Engineering Materials, v.264-268, p. 1197-1200, (2004).
Electrical and Thermal Properties of the GaSb--FeGa1.3 Eutectic I. Aliev, A. A. Khalilova, D. G. Arasly, R. N. Rahimov, and M.Tanoglu, Inorganic Materials, 2004, No4, (2004).
Mechanical properties and microstructural evaluation of AA5013 aluminum alloy treated in the semi-solid state by SIMA process, Saklakoglu, N., Saklakoglu, I.E., Tanoglu, M., Oztas, O., Cubukcuoglu, O, Journal of Materials Processing Technology, 148, 103-107 (2004).
The effect of adhesive on the strengthening of aluminum foam-filled circular tubes, Toksoy, A. K., Tanoğlu, M., Güden, M., Hall, I. W. Journal of Materials Science 39, 1503-1506 (2004)
Compressive mechanical behavior of the E-glass / polyester composite laminates tailored with a thermoplastic preforming binder, Tanoğlu, M., Seyhan, A. T., Material Science and Engineering: A, A363, 335-344 (2003).
Features of electron and phonon prosesses in GaSb-FeGa1.3 eutectics, Aliyev, M. I., Khalilova, A.A., Arasli, D. H., Rahimov, R. N., Tanoglu, M., Ozyuzer, L., Journal of Physics: D, Applied Physics 36, 2627-2633 (2003).
Investigating the Effects of a Polyester Performing Binder on the Mechanical and Ballistic Performance of E-glass Fiber Reinforced Polyester Composites, Tanoğlu, M., Seyhan, A. T., International Journal of Adhesion and Adhesives, 23, 1-8 (2003).
Fiber/matrix interphase characterization using the dynamic interphase loading apparatus, Foley, M.E. Abu Obaid, A., Huang, X., Tanoğlu, M., Bogetti, T.A., McKnight, S.H., Gillespie Jr., J.W., Composites Part A: Applied Science and Engineering, 33, 1345–1348 (2002)
Effects of Thermoplastic Preforming Binder on Properties of S2- Glass Fabric Reinforced Epoxy Composites, Tanoğlu. M., Robert, S., Heider, D., McKnight, S.H., Gillespie, Jr., J. W., International Journal of Adhesion and Adhesives, 21, 187–195 (2001).
Investigation of Properties of the Interphases Formed due to the Glass Fiber Sizings, Tanoğlu, M., Ziaee, S., McKnight, S.H., Palmese, G. R., Gillespie, Jr., J. W., Journal of Materials Science, 36, 3041-3053 (2001).
The Effects of Glass Fiber Sizings on the Strength and Energy Absorption of the Fiber/Matrix Interphase under High Loading Rates, Tanoğlu, M., McKnight, S.H., Palmese, G. R., Gillespie, Jr., J. W., Composites Science and Technology, 61, pp. 205-220 (2001).
A New Technique to Characterize the Fiber/Matrix Interphase Properties under High-Strain-Rates Tanoğlu, M., McKnight, S.H., Palmese, G. R., Gillespie, Jr., J. W., Composites Part A: Applied Science and Engineering, 31, 1127-1138 (2000).
Dynamic Stress/Strain Response of the Interphase in Polymer Matrix Composites, Tanoğlu, M., McKnight, S.H., Palmese, G. R., Gillespie, Jr., J. W., Polymeric Composites, v.22, n. 5, 621 – 635 (2001).
Use of Silane Coupling Agents to Enhance the Performance of Adhesively Bonded Alumina to Resin Hybrid Composites, Short Communication, Tanoğlu, M., McKnight, S.H., Palmese, G. R., Gillespie, Jr., J. W., International Journal of Adhesion and Adhesives, 18 431-434 (1998).
A SiC/SiC Composite Produced by Polymer Pyrolysis of Polydiphenylcarbosilane, Tanoğlu, M., Parvizi-Majidi, A., Science and Engineering of Composite Materials, volume 7, no 3, 239-247 (1998)
